Hickory Mountain Chimney & Masonry, Ltd.

Keith Roosa, President

2324 Bruynswick Rd   •   Wallkill NY 12589
800-554-SOOT (7668)  •  845-895-2750  •  FAX: 845-895-3988

The Clear Solution For All Your Masonry Applications

      Approximately 70 percent of the buildings in the United States are masonry, and the most common problem with these structures is water penetration.
      Water causes billions of dollars in damage annually in the form of staining, spalling, deterioration, loss of insulation value, and ultimately, structural failure. All new and existing masonry is susceptible to these water penetration problems. Yet even if damaged masonry is repaired, it will continue to deteriorate if left unprotected.
      MasonrySaver water repellent is a modified siloxane small enough to penetrate most masonry and concrete pores. Unlike acrylics, silicones, and other waterproofing sealers that remain on the surface and trap water vapors, MasonrySaver allows deep penetration of its active ingredient, up to 1/4 inch or more.
As a result, the special siloxanes in MasonrySaver react to form strong chemical bonds beneath a treated surface. These bonds allow MasonrySaver to become a physical part of the structure and provide long-term water repellent protection.

Prevent Water Damage Before It Occurs.

      No water repellent is a substitute for proper construction and workmanship. The first step in prefenting water damage is to make necessary repairs including structural cracks and deteriorated mortar joints. The second step is to protect porous masonry from the destructive forces of water penetration by applying MasonrySaver water repellent.

100% Breathable

      Moisture, from either internal or external sources, is usually present in brick, masonry, and concrete. A MasonrySaver treatment is 100 percent vapor permeable, which reduces the spalling, scaling, deterioration, and freeze-thaw damage that results from trapped moisture when clear coatings and water sealers are used.

Provides Superior Protection

      MasonrySaver protects masonry and concrete structures from discoloration and weathering deterioration. This superior protection greatly reduces the intrusion of water and waterborne contaminants, such as aid rain, dirt, and salts. MasonrySaver extends the service life of masonry structures by protecting them from premature deterioration.

Protect Your Masonry and the Environment

      SaverSystems offers a complete line of water-based and solvent-based formulas to suit your specific waterproofing needs. MasonrySaver water-based siloxane formulas have a low volatile organic content (VOC) and comply with EPA standards. These products are easy to apply and are environmentally favorable for surrounding materials and vegetation.
      MasonrySaver water repellents provide maximum protection for a variety of above-grade masonry and concrete surfaces. These products are suitable for both vertical and horizontal applications, including high traffic areas such as driveways and walkways. They are easily applied with low pressure or airless spray equipment. One application is usually sufficient to ensure long-term protection.

MasonrySaver Water Repellents

• Superior Cost/Performance Ratio
• Superior Technology
• 100% Water Vapor Transmission
• Warranted Protection
• Resists Staining and Efflorescence
• Won't Alter Surface Appearance

      MasonrySaver water repellents are developed
for use on brick, concrete, limestone, natural stone,
stucco veneer, and most other above-grade masonry.
Because they do not alter the color or appearance of a
surface, these water repellents are the ideal choice for
restoration and preservation projects.